Description

The boiler has a self-supporting, entirely welded cylinder construction. The basis there is a boiler solid with cylinder form for desiderative medium and required output in horizontal three-droughting arrangement. Added flue makeing ideal conditions for building quit capacious combustion chamber within burn out zone and utilization of suitable grate. In the combustion chamber there is a brickwork which form and size is in accordance with concrete kind of fuel and requirements of filling up of temperature in combustion chamber with respect of perfect combusting and low emissions. In the end of combustion chamber there is a burn-out zone where comming up to cooling of ash matter and to burning out of wastes before enter to convection part of boiler. Two bundle of fire tubes and collector for draining of wastes is connected to flue with combustion chamber. Flue and both of turnround chambers having door for cleansing, service, maintenance and possible repairation.

1.Input of fuel, 2. Combustion chamber, 3. Burn out chamber, 4. Primary air, 5. Secondary air, 6. Strong grate cooling by water, 7. Turnround chamber  I., 8. Turnround chamber II., 9.Fire tubes, 10. collector for draining of wastes

Purpose and description:

EKOVARIANT boilers are designed for heating plants of: :

• Industrial buildings (hall, kiln,…)
• Building with preparing of WSW-warm service water (offices, schools,…)
• Factories with lower consumption for technological purposes (hospitals, laundries,…)
• Factories with higher consumption for technological purposes (breweries, paper-mills,…)

This conception makes it possible to manufacture a heat source having optimal parametres in accordance with in the concrete requirements of the warm-water net with minimal built-up area dimensions. Boilers can be delivered in warm-water, hot-water and steam variations, and that within the range of parameters:

• Thermal output 0,5÷ 1,0 MW
• Operating over-pressure 0,3 ÷ 1,0 MPa